I am FINALLY getting to some of the DIY projects that have been cluttering up my office. We've had a super busy, fun-filled summer- and between buying a new car, and our summer road trips we finally had an easy weekend at home. This project takes about 15 min. plus running it through the wash. If I had more time I would have boiled my own dye, but I was using this same tub of leftover dye to fix some shirts that got ruined in the wash, so I just used that dye for this project. If you have the time and patience I recommend making your own natural dye, here is a link.
Supplies:
T-shirt
Dye
Basin/sink
Rubber Gloves
Hanger
Hair Clips
Directions:
1. Follow the instructions for mixing your dye, and be sure to read the safety and cleaning labels because when they say it will dye your sink purple, they don't lie. (Stainless is easier to clean than white porcelain, so line your sink with a wash tub if you are unsure.)
2. I got my t-shirt wet first, and used a chip clip and a hair clip to hold back the sleeves from the dye. Hang your shirt on a hanger and slowly begin to fold it into the dye.
3. Once you have reached the desired height of your color lift your shirt out, you only want the color at the top of the shirt to be submerged for about 1 second.
4. Slowly pull the shirt out, I mentally divided it into 3 parts and let the shirt sit for about 3 min. at each level. At this point I felt like the bottom looked great, but that the line between the white and the first bit of color was too harsh, so I diluted my dye with some water, and I dipped it back in about an inch above my previous line. (it was so much better, so I recommend this technique for blending the color into the white.)
5. Then empty your dye and rinse the shirt until the water runs clear. Make sure you don't let the dye run into the white part of the shirt while rinsing. Hold the shirt with the white on top and let the faucet run through the dye until its clear. (If you have a sprayer on your sink it helps to use this too.)
6. Wash the shirt according to your dye instructions. Be aware that the white part of your shirt will probably get some of the dye run off in the washing machine, but that it's not a lot, or even enough to really worry about, and it helps the shirt look more blended overall, and not like stripes. You can see in the last two images above the shirt before washing and after washing.